AVS Adhesive-backed Silica Slit Tape

AVSil Needled Insulation

CODE	THICKNESS	DENSITY	WIDTH*	ROLL LENGTH*	AREA*
AB25U	1/4 in. (6.35 mm)	8 lb/ft.³ (130 kg/m³)
AB50U	1/2 in. (12.7 mm)	8 lb/ft.³ (130 kg/m³)
AB100U	1 in. (25.4 mm)	8 lb/ft.³ (130 kg/m³)

*Contact for details.

CODE	THICKNESS	DENSITY	WIDTH	ROLL LENGTH	AREA
AB25S	1/4 in. (6.35 mm)	10 lb/ft.³ (160 kg/m³)	36 in. (91.4 cm)	116 ft. (36 m)	348 ft.² (32.9 m²)
AB50S	1/2 in. (12.7 mm)	10 lb/ft.³ (160 kg/m³)	36 in. (91.4 cm)	58 ft. (18 m)	174 ft.² (16.5 m²)
AB100S	1 in. (25.4 mm)	10 lb/ft.³ (160 kg/m³)	36 in. (91.4 cm)	33 ft. (9.5 m)	99 ft.² (8.6 m²)

The flexibility of AVSil Needled Insulation enables the product to be easily cut and fabricated into intricate design configurations. Excellent thermal strength enhances AVSil high product value-in-use.

Product Description

AVSil Needled Insulation, made from amorphous silica, is ideal for a wide range of critical, high temperature applications. AVSil Needled Insulation comes in in five thicknesses and can be Shrunk (nominal 2%) or Un-Shrunk. It contains no shot (small spheres) which is important in certain insulation applications.

AVSil is designed to withstand temperatures up to 2,000°F (1,090°C). It is comprised of non-respirable, 9-micron filament fibers that are mechanically bonded and contain no added resins or adhesives. AVSil Needled Insulation is environmentally-friendly since it contains no harmful refractory ceramic fibers (RCF).

Potential Applications

Thermal Insulation Pads
Removable Insulation Covers
Thermal Curtains
Insulation for Furnaces
Stress Relieving Blankets
Aluminum Rolling Mills
Glass Processing
Turbine Insulation
Engine Exhaust Insulation
Engine Compartment Insulation

Extensively used in the following Industries:

Aerospace
Automotive
Industrial

AVS Industries cannot predict all of the potential applications for which customers may attempt to use the Silica Products. Silica Products will have varying degrees of effectiveness for each potential application depending on the maximum temperature attained, the length of use, and the amount of temperature fluctuation. If the customer has any questions regarding the use of Silica Products in a particular application, please contact AVS Industries at 302.221.1720 and we will provide a sample of the Silica Products for testing. This product is not warranted against injuries or damages of any kind caused by uses for which this product was not designed, intended, or tested by AVS Industries.