AVS Adhesive-backed Silica Slit Tape

AVS Adhesive-backed Slit Tapes

PRODUCT NUMBER	WIDTH	NOMINAL THICKNESS	NOMINAL ROLL LENGTH
ST84CHAB-1	1 in.	0.030 in.	150 ft.
ST84CHAB-1 1/2	1 1/2 in.	0.030 in.	150 ft.
ST84CHAB-2	2 in.	0.030 in.	150 ft.
ST84CHAB-3	3 in.	0.030 in.	150 ft.
ST84CHAB-4	4 in.	0.030 in.	150 ft.
ST188CHAB-1	1 in.	0.054 in.	75 ft.
ST188CHAB-1 1/2	1 1/2 in.	0.054 in.	75 ft.
ST188CHAB-2	2 in.	0.054 in.	75 ft.
ST188CHAB-3	3 in.	0.054 in.	75 ft.
ST188CHAB-4	4 in.	0.054 in.	75 ft.

*Other widths available upon request.

AVS Adhesive-backed Slit Tape combines the non-raveling properties of a woven tape with an adhesive system to facilitate installation for various product applications.

Product Description

AVS Slit Tapes are made by slitting the following standard silica and fiberglass fabrics:

AVSil 84CH - Silica Fabric
AVSil 188CH - Silica Fabric
ALM84CH - Aluminized Mylar Film on Silica
ALUMF2025 - Aluminum Foil Laminated Fiberglass Fabric

AVSil Silica Adhesive-backed Slit Tapes are intended for high temperature applications with continuous service up to 1,800°F (982°C). ALUMF2025 aluminized fiberglass tapes are recommended for high temperature applications up to 1,000°F (538°C).

Potential Benefits

Improved Thermal Protection
Energy Savings
Improved Safety

Potential Applications

Insulation Wrap for Pipes, Hoses and Electrical Cables
Thermal Welding Gasket for Transformers
Isolated High Temperature Welding Protection
Thermal and/or Welding Blanket Fabric

Extensively used in the following Industries:

Power Generation
Refinery
Construction
Shipbuilding
Metal Processing

AVS Industries cannot predict all of the potential applications for which customers may attempt to use the Silica Products. Silica Products will have varying degrees of effectiveness for each potential application depending on the maximum temperature attained, the length of use, and the amount of temperature fluctuation. If the customer has any questions regarding the use of Silica Products in a particular application, please contact AVS Industries at 302.221.1720 and we will provide a sample of the Silica Products for testing. This product is not warranted against injuries or damages of any kind caused by uses for which this product was not designed, intended, or tested by AVS Industries.